Mousetrap Vehicle B

[Jim_R]

Discussion for Mousetrap Vehicle B.

Mousetrap Vehicle Wiki
The Best of Wiki
The Best of Wiki
The Best of Wiki
Image Gallery
2010 Thread
2011 Thread
2012 Thread

[retired1]

Question: you can use two mousetraps, but you cannot modify the trigger. So, how can you hit both triggers at the same time with a pencil in the vertical position. Food for thought.

[twototwenty]

I believe that you would want to attach the triggers together so that the mousetraps spring in unison no matter what...granted, I have not seen the rules for this event and it has been three years since I thought much of it, but I think that's correct.

[iwonder]

In the past we just tied the two mousetraps together and one trigger was able to hold both springs, so just don't set one of them and it should be fine.

[retired1]

Initial thought was it would initially give a lopsided pull, but it might not be too bad. A big plus is not having to try to latch both traps. My thumb only recently recovered from a snap last spring.

[iwonder]

Actually, if you only use on rod for the string, it couldn't possibly be lopsided, now could it?

[retired1]

It could be for a short period of time as one side will pull further ahead of the secured side, even tho they are soldered together and have a joint kill bar extension.

[hebblethwaite]

Do you guys have any advice on how to make a mouse trap go further and faster besides make it lighter.

[Gemma W]

Do you guys have any advice on how to make a mouse trap go further and faster besides make it lighter.

Have you tried looking at the wiki? There is a lot of information to be found there.

[illusionist]

This is pretty cool:

http://www.pitsco.com/store/detail.aspx ... &l=&bhcp=1