End Task

User avatar
ET2020
Member
Member
Posts: 67
Joined: April 16th, 2018, 11:35 am
Division: C
State: NY
Has thanked: 0
Been thanked: 0

Re: End Task

Post by ET2020 »

nicholasmaurer wrote:My primary concern is not with "freestanding" but with "not attached." It hinges on whether you deem the magnetic force to qualify as attachment. You can make a strong case either way - an FAQ will be needed.

I think they would have a very tough time saying a magnetic field counts as attachment. Technically, the battery is constantly being influenced by magnetic forces, since the Earth emits a magnetic field (not to mention the magnet task that requires you to have a magnet somewhere within the same device as the battery).
Fayetteville Manlius High School
2020 Events: Astronomy, Code, Dynamic, PPP
nicholasmaurer
Coach
Coach
Posts: 422
Joined: May 19th, 2017, 10:55 am
Division: Grad
State: OH
Has thanked: 1 time
Been thanked: 22 times

Re: End Task

Post by nicholasmaurer »

ET2020 wrote:
nicholasmaurer wrote:My primary concern is not with "freestanding" but with "not attached." It hinges on whether you deem the magnetic force to qualify as attachment. You can make a strong case either way - an FAQ will be needed.

I think they would have a very tough time saying a magnetic field counts as attachment. Technically, the battery is constantly being influenced by magnetic forces, since the Earth emits a magnetic field (not to mention the magnet task that requires you to have a magnet somewhere within the same device as the battery).
You are talking about magnetic forces on the battery that differ by several orders of magnitude - those are not fair comparisons in my opinion. How do you define attachment? How is a strong magnetic force practically different from other methods of attachment?
Assistant Coach and Alumnus ('14) - Solon High School Science Olympiad
Tournament Director - Northeast Ohio Regional Tournament
Tournament Director - Solon High School Science Olympiad Invitational

Opinions expressed on this site are not official; the only place for official rules changes and FAQs is soinc.org.
User avatar
ET2020
Member
Member
Posts: 67
Joined: April 16th, 2018, 11:35 am
Division: C
State: NY
Has thanked: 0
Been thanked: 0

Re: End Task

Post by ET2020 »

nicholasmaurer wrote:
ET2020 wrote:
nicholasmaurer wrote: My primary concern is not with "freestanding" but with "not attached." It hinges on whether you deem the magnetic force to qualify as attachment. You can make a strong case either way - an FAQ will be needed.
I think they would have a very tough time saying a magnetic field counts as attachment. Technically, the battery is constantly being influenced by magnetic forces, since the Earth emits a magnetic field (not to mention the magnet task that requires you to have a magnet somewhere within the same device as the battery).
You are talking about magnetic forces on the battery that differ by several orders of magnitude - those are not fair comparisons in my opinion. How do you define attachment? How is a strong magnetic force practically different from other methods of attachment?
A strong magnetic force is different because there is no physical connection between the atoms in the battery with any atoms of the magnetic source. Attaching is defined as "fastening, joining or connecting"- a magnetic field does none of those things.

If the ES want to ban this, they will have to specify either a maximum allowed strength of magnetic field that can be exerted on a battery (very difficult to measure) or a minimum distance that all sources of a magnetic force must be from the battery. Either one is clunky and difficult to enforce.
Fayetteville Manlius High School
2020 Events: Astronomy, Code, Dynamic, PPP
nicholasmaurer
Coach
Coach
Posts: 422
Joined: May 19th, 2017, 10:55 am
Division: Grad
State: OH
Has thanked: 1 time
Been thanked: 22 times

Re: End Task

Post by nicholasmaurer »

ET2020 wrote:
nicholasmaurer wrote:
ET2020 wrote: I think they would have a very tough time saying a magnetic field counts as attachment. Technically, the battery is constantly being influenced by magnetic forces, since the Earth emits a magnetic field (not to mention the magnet task that requires you to have a magnet somewhere within the same device as the battery).
You are talking about magnetic forces on the battery that differ by several orders of magnitude - those are not fair comparisons in my opinion. How do you define attachment? How is a strong magnetic force practically different from other methods of attachment?
A strong magnetic force is different because there is no physical connection between the atoms in the battery with any atoms of the magnetic source. Attaching is defined as "fastening, joining or connecting"- a magnetic field does none of those things.

If the ES want to ban this, they will have to specify either a maximum allowed strength of magnetic field that can be exerted on a battery (very difficult to measure) or a minimum distance that all sources of a magnetic force must be from the battery. Either one is clunky and difficult to enforce.
I agree that is one valid interpretation of attachment. I am of a similar opinion personally.

However, I have also spoken with experienced ES in this event who strongly disagree with you. They have a different, and (in my opinion) equally valid interpretation: if they attempt to remove the battery from the platform, are they going to have to overcome more than gravity (and negligible forces such as the Earth's magnetic field) to do so? If they face added resistance in removing/moving the battery, they would argue it is attached (although perhaps poorly). While I agree with you on the physics, I think their argument is more in line with the spirit of the rules here.

If you want to use a magnet be my guest. But without an FAQ I expect it to be hit or miss with supervisors.
Assistant Coach and Alumnus ('14) - Solon High School Science Olympiad
Tournament Director - Northeast Ohio Regional Tournament
Tournament Director - Solon High School Science Olympiad Invitational

Opinions expressed on this site are not official; the only place for official rules changes and FAQs is soinc.org.
saathvik02
Member
Member
Posts: 5
Joined: March 27th, 2018, 1:11 pm
Has thanked: 0
Been thanked: 0

Re: End Task

Post by saathvik02 »

How are you guys planning on raising the platform?
chrroh
Member
Member
Posts: 65
Joined: May 15th, 2017, 11:27 pm
Division: Grad
State: IL
Has thanked: 0
Been thanked: 3 times

Re: End Task

Post by chrroh »

saathvik02 wrote:How are you guys planning on raising the platform?
I was thinking of either using a Scissor Lift or a Rack and Pinion. Theoretically they'd be controlled by a motor that was previously activated by something hitting a limit switch.
2014 - 2018 Science Olympiad Alumni - Park View '14 | Niles West '18
Illinois State 2018 - 2nd Dynamic Planet | 3rd Experimental Design
chessbucket
Member
Member
Posts: 23
Joined: September 5th, 2018, 4:34 pm
Has thanked: 0
Been thanked: 0

Re: End Task

Post by chessbucket »

Hint:friction...
User avatar
CookiePie1
Exalted Member
Exalted Member
Posts: 428
Joined: February 15th, 2018, 5:05 pm
Division: C
State: NJ
Pronouns: He/Him/His
Has thanked: 121 times
Been thanked: 93 times

Re: End Task

Post by CookiePie1 »

chessbucket wrote:Hint:friction...
Hint: WD-40 :lol:
South Brunswick High School Captain '22
2020 Events: Protein Modeling, Ping Pong Parachute, Wright Stuff, Sounds of Music
2021 Events: Protein Modeling, Sounds of Music, Ornithology
2022 Events: TBD

Reality is merely an illusion, albeit a very persistent one.
-Albert Einstein
Jacobi
Exalted Member
Exalted Member
Posts: 137
Joined: September 4th, 2018, 7:47 am
Has thanked: 0
Been thanked: 0

Re: End Task

Post by Jacobi »

saathvik02 wrote:How are you guys planning on raising the platform?
I'm not an expert, but I would think that a scissor jack or a hydraulic jack would work. Such a hydraulic jack might use gravity + an electrically controlled pump. Thoughts?
chessbucket
Member
Member
Posts: 23
Joined: September 5th, 2018, 4:34 pm
Has thanked: 0
Been thanked: 0

Re: End Task

Post by chessbucket »

Jacobi wrote:
saathvik02 wrote:How are you guys planning on raising the platform?
I'm not an expert, but I would think that a scissor jack or a hydraulic jack would work. Such a hydraulic jack might use gravity + an electrically controlled pump. Thoughts?
KISS: keep it simple and silly
Locked

Return to “Mission Possible C”

Who is online

Users browsing this forum: No registered users and 1 guest