Mousetrap Vehicle B
-
- Member
- Posts: 32
- Joined: April 15th, 2010, 8:48 pm
- Division: Grad
- Has thanked: 0
- Been thanked: 0
Re: Mousetrap Vehicle B
I'm supervising this event and am curious as to the exact intent of the Center Line Bonus wording for purposes of scoring.
My gut instinct tells me the qualification should be based on the entire duration of the run but the text seems to indicate otherwise:
6d.
"A Center Line Bonus of -20.0 points is awarded if ... while the vehicle travels between the start and finish line as determined by the Measurement point."
So is this saying that if a vehicle veers such that the Center Line is no longer between the vehicle's track after the measurement point has passed the finish line, it still receives the bonus?
My gut instinct tells me the qualification should be based on the entire duration of the run but the text seems to indicate otherwise:
6d.
"A Center Line Bonus of -20.0 points is awarded if ... while the vehicle travels between the start and finish line as determined by the Measurement point."
So is this saying that if a vehicle veers such that the Center Line is no longer between the vehicle's track after the measurement point has passed the finish line, it still receives the bonus?
-
- Member
- Posts: 2107
- Joined: January 9th, 2009, 7:30 pm
- Division: Grad
- State: OH
- Has thanked: 1 time
- Been thanked: 56 times
Re: Mousetrap Vehicle B
Yesr00ki316 wrote: So is this saying that if a vehicle veers such that the Center Line is no longer between the vehicle's track after the measurement point has passed the finish line, it still receives the bonus?
Student Alumni
National Event Supervisor
National Physical Sciences Rules Committee Chair
-
- Member
- Posts: 2107
- Joined: January 9th, 2009, 7:30 pm
- Division: Grad
- State: OH
- Has thanked: 1 time
- Been thanked: 56 times
Re: Mousetrap Vehicle B
Builder9 wrote:Are there any size limitations or requirements for the mousetrap cars? I let someone borrow my rules sheet and I haven't gotten it back yet. Thanks
yes <1m long and <.35m wide
Student Alumni
National Event Supervisor
National Physical Sciences Rules Committee Chair
-
- Member
- Posts: 2
- Joined: February 4th, 2012, 8:58 am
- Division: B
- State: NY
- Has thanked: 0
- Been thanked: 0
Re: Mousetrap Vehicle B
Thanks for your reply, I see it now on the scoring sheet.chalker wrote:Builder9 wrote:Are there any size limitations or requirements for the mousetrap cars? I let someone borrow my rules sheet and I haven't gotten it back yet. Thanks
yes <1m long and <.35m wide
- mousetrapfury
- Member
- Posts: 10
- Joined: November 29th, 2011, 12:48 pm
- Division: B
- State: NC
- Has thanked: 0
- Been thanked: 0
Re: Mousetrap Vehicle B
Hey what would be the best way to keep the chasis and wheels from sliding around
- mousetrapfury
- Member
- Posts: 10
- Joined: November 29th, 2011, 12:48 pm
- Division: B
- State: NC
- Has thanked: 0
- Been thanked: 0
-
- Member
- Posts: 2107
- Joined: January 9th, 2009, 7:30 pm
- Division: Grad
- State: OH
- Has thanked: 1 time
- Been thanked: 56 times
Re: Mousetrap Vehicle B
mousetrapfury wrote:Hey what would be the best way to keep the chasis and wheels from sliding around
Without more of a description of your problem, it's hard for anyone to help you. That said, I suspect what you need are some sort of bearings to hold the axles to the chassis.
Student Alumni
National Event Supervisor
National Physical Sciences Rules Committee Chair
Who is online
Users browsing this forum: No registered users and 1 guest