2010 Wright Stuff Guidelines
- eta150
- Member
- Posts: 269
- Joined: March 11th, 2009, 3:48 pm
- Division: Grad
- State: PA
- Has thanked: 0
- Been thanked: 0
Re: 2010 Wright Stuff Guidelines
You do have to id your team name and number, but you do not have to have opaque covering pieces like two years ago. This I know, because I "caused" (through rules clarifications) the reformatting of the scoring charts to get rid of the opaque covering parameter.
#ACESWILD
-
- Member
- Posts: 31
- Joined: February 21st, 2010, 11:27 am
- Division: B
- State: PA
- Has thanked: 0
- Been thanked: 0
Re: 2010 Wright Stuff Guidelines
In the rules it says that we should have the demensions of the room that we will be flying in. Because that doesn't see mt oactually happen, if anyone is from PA here, do you know the dimensions fo the room at Juniata?
-
- Member
- Posts: 49
- Joined: October 24th, 2009, 6:45 pm
- Division: B
- State: PA
- Has thanked: 0
- Been thanked: 0
Re: 2010 Wright Stuff Guidelines
Juniata's IM gym is about 35' high in the center, as eta150 said. However, it slopes down to around 20' or less at the sides, so you don' t really have 35' to work with. A tight circling plane is advantage if you want to use the height that is there.
Danielle, if you were 3rd last year, are you one of the twins?
Danielle, if you were 3rd last year, are you one of the twins?
- blue cobra
- Exalted Member
- Posts: 417
- Joined: April 9th, 2009, 6:10 pm
- Division: Grad
- State: NY
- Has thanked: 0
- Been thanked: 0
Re: 2010 Wright Stuff Guidelines
It seems like you got your answer, but to others with the same problem submit a rule clarification to your state asking the dimensions. Sometimes, however, the state might not know where it will be held until only a short time before the competition.DanielleS wrote:In the rules it says that we should have the dimensions of the room that we will be flying in. Because that doesn't seem to actually happen, if anyone is from PA here, do you know the dimensions for the room at Juniata?
In full color since 2006
-
- Member
- Posts: 31
- Joined: February 21st, 2010, 11:27 am
- Division: B
- State: PA
- Has thanked: 0
- Been thanked: 0
Re: 2010 Wright Stuff Guidelines
jcollier wrote:Juniata's IM gym is about 35' high in the center, as eta150 said. However, it slopes down to around 20' or less at the sides, so you don' t really have 35' to work with. A tight circling plane is advantage if you want to use the height that is there.
Danielle, if you were 3rd last year, are you one of the twins?
Thank you. And yupp.
-
- Member
- Posts: 49
- Joined: October 24th, 2009, 6:45 pm
- Division: B
- State: PA
- Has thanked: 0
- Been thanked: 0
Re: 2010 Wright Stuff Guidelines
Danielle:
I hope your dad will be helping time again this year. I was the guy weighing motors last year. As I recall, your plane missed the beams in the I.M. Gym by inches a few times last year, so I would say that height was just about perfect! Good luck this year. I hope to be helping John Clapp again.
I hope your dad will be helping time again this year. I was the guy weighing motors last year. As I recall, your plane missed the beams in the I.M. Gym by inches a few times last year, so I would say that height was just about perfect! Good luck this year. I hope to be helping John Clapp again.
-
- Member
- Posts: 3
- Joined: March 12th, 2010, 10:14 am
- Division: B
- Has thanked: 0
- Been thanked: 0
Re: 2010 Wright Stuff Guidelines
I was just noticing on soinc.org that the summer institute lists helicopter/glider as courses. Does anyone know if that means C may get helicopter and B get glider and will it be balloon launch, catapult or towline glider?
-
- Member
- Posts: 1649
- Joined: April 30th, 2007, 7:54 am
- Has thanked: 0
- Been thanked: 29 times
Re: 2010 Wright Stuff Guidelines
Most likely, Helicopter Duration Div C and Bottle Rocket Div B for next year. It can of course change, but not likely at this late date. There may be other events like glider run as trials since we'll be bringing that back in a few years.
Jeff Anderson
Livonia, MI
Jeff Anderson
Livonia, MI
Who is online
Users browsing this forum: No registered users and 0 guests